Explosive events associated with a surge

The solar atmosphere contains a wide variety of small-scale transient features. Here, we explore the inter-relation between some of them such as surges, explosive events and blinkers via simultaneous spectral and imaging data taken with the TRACE imager, the SUMER, and CDS spectrometers on board SoHO, and SVST La Palma. The alignment of all data both in time and solar XY shows that SUMER line profiles, which are attributed to explosive events, are due to a surge phenomenon. The surge is triggered, most probably, by one or more Elerman bombs which are best visible in Halpha +-350 A but were also registered by TRACE Fe IX/X 171 A and correspond to a strong radiance increase in the CDS Mg IX 368.07 A line. With the present study we demonstrate that the division of small-scale transient events into a number of different subgroups, for instance explosive events, blinkers, spicules, surges or just brightenings, is ambiguous, implying that the definition of a feature based only on either spectroscopic or imaging characteristics as well as insufficient spectral and spatial resolution can be incomplete.Comment: 17 pages, 7 figures, 1 tabl

A study of energy concentration and drain in incompressible fluids

In this paper we examine two opposite scenarios of energy behavior for solutions of the Euler equation. We show that if $u$ is a regular solution on a time interval $[0,T)$ and if $u \in L^rL^\infty$ for some $r\geq \frac{2}{N}+1$, where $N$ is the dimension of the fluid, then the energy at the time $T$ cannot concentrate on a set of Hausdorff dimension samller than $N - \frac{2}{r-1}$. The same holds for solutions of the three-dimensional Navier-Stokes equation in the range $5/3<r<7/4$. Oppositely, if the energy vanishes on a subregion of a fluid domain, it must vanish faster than (T-t)^{1-\d}, for any \d>0. The results are applied to find new exclusions of locally self-similar blow-up in cases not covered previously in the literature.Comment: an update of the previous versio

The Thermal Instability of Solar Prominence Threads

The fine structure of solar prominences and filaments appears as thin and long threads in high-resolution images. In H-alpha observations of filaments, some threads can be observed for only 5 - 20 minutes before they seem to fade and eventually disappear, suggesting that these threads may have very short lifetimes. The presence of an instability might be the cause of this quick disappearance. Here, we study the thermal instability of prominence threads as an explanation of their sudden disappearance from H-alpha observations. We model a prominence thread as a magnetic tube with prominence conditions embedded in a coronal environment. We assume a variation of the physical properties in the transverse direction, so that the temperature and density continuously change from internal to external values in an inhomogeneous transitional layer representing the particular prominence-corona transition region (PCTR) of the thread. We use the nonadiabatic and resistive magnetohydrodynamic equations, which include terms due to thermal conduction parallel and perpendicular to the magnetic field, radiative losses, heating, and magnetic diffusion. We combine both analytical and numerical methods to study linear perturbations from the equilibrium state, focusing on unstable thermal solutions. We find that thermal modes are unstable in the PCTR for temperatures higher than 80,000 K, approximately. These modes are related to temperature disturbances that can lead to changes in the equilibrium due to rapid plasma heating or cooling. For typical prominence parameters, the instability time scale is of the order of a few minutes and is independent of the form of the temperature profile within the PCTR of the thread. This result indicates that thermal instability may play an important role for the short lifetimes of threads in the observations.Comment: Accepted for publication in Ap

Limits on the evolution of galaxies from the statistics of gravitational lenses

We use gravitational lenses from the Cosmic Lens All-Sky Survey (CLASS) to constrain the evolution of galaxies since redshift $z \sim 1$ in the current \LCDM cosmology. This constraint is unique as it is based on a mass-selected lens sample of galaxies. Our method of statistical analysis is the same as in Chae (2003). We parametrise the early-type number density evolution in the form of $(1+z)^{\nu_n}$ and the velocity dispersion as $(1+z)^{\nu_v}$. We find that $\nu_n=-0.11^{+0.82}_{-0.89}$ ($1\sigma$) if we assume $\nu_v =0$, implying that the number density of early-type galaxies is within 50% to 164% of the present-day value at redshift $z=1$. Allowing the velocity dispersion to evolve, we find that $\nu_v=-0.4^{+0.5}_{-0.4}$ ($1\sigma$), indicating that the velocity dispersion must be within 57% and 107% of the present-day value at $z=1$. These results are consistent with the early formation and passive evolution of early-type galaxies. More stringent limits from lensing can be obtained from future large lens surveys and by using very high-redshift quasars (z \ga 5) such as those found from the Sloan Digital Sky Survey.Comment: 10 pages (preprint format), 2 figures, ApJL in press (December 20th issue

Magnetic and humidity sensing properties of nanostructured Cu[x]Co[1-x]Fe2O4 synthesized by auto combustion technique

Magnetic nanomaterials (23-43 nm) of Cu$_x$Co$_{1-x}$Fe$_2$O$_4$\ (x = 0.0, 0.5 and 1.0) were synthesized by auto combustion method. The crystallite sizes of these materials were calculated from X-ray diffraction peaks. The band observed in Fourier transform infrared spectrum near 575 cm$^{-1}$ in these samples confirm the presence of ferrite phase. Conductivity measurement shows the thermal hysteresis and demonstrates the knee points at 475$^o$C, 525$^o$C and 500$^o$C for copper ferrite, cobalt ferrite and copper-cobalt mixed ferrite respectively. The hystersis M-H loops for these materials were traced using the Vibrating Sample Magnetometer (VSM) and indicate a significant increase in the saturation magnetization (M$_s$) and remanence (M$_r$) due to the substitution of Cu$^{2+}$ ions in cobalt ferrite, while the intrinsic coercivity (H$_c$) was decreasing. Among these ferrites, copper ferrite exhibits highest sensitivity for humidity.Comment: 12 pages, 7 figure

New Modeling of the Lensing Galaxy and Cluster of Q0957+561: Implications for the Global Value of the Hubble Constant

The gravitational lens 0957+561 is modeled utilizing recent observations of the galaxy and the cluster as well as previous VLBI radio data which have been re-analyzed recently. The galaxy is modeled by a power-law elliptical mass density with a small core while the cluster is modeled by a non-singular power-law sphere as indicated by recent observations. Using all of the current available data, the best-fit model has a reduced chi-squared of approximately 6 where the chi-squared value is dominated by a small portion of the observational constraints used; this value of the reduced chi-squared is similar to that of the recent FGSE best-fit model by Barkana et al. However, the derived value of the Hubble constant is significantly different from the value derived from the FGSE model. We find that the value of the Hubble constant is given by H_0 = 69 +18/-12 (1-K) and 74 +18/-17 (1-K) km/s/Mpc with and without a constraint on the cluster's mass, respectively, where K is the convergence of the cluster at the position of the galaxy and the range for each value is defined by Delta chi-squared = reduced chi-squared. Presently, the best achievable fit for this system is not as good as for PG 1115+080, which also has recently been used to constrain the Hubble constant, and the degeneracy is large. Possibilities for improving the fit and reducing the degeneracy are discussed.Comment: 22 pages in aaspp style including 6 tables and 5 figures, ApJ in press (Nov. 1st issue

Patient and Physician Determinants of Implantable Cardioverter Defibrillator Use in the Heart Failure Population

Recent studies report surprisingly low rates of implantable cardioverter defibrillator (ICD) placement for primary prevention against sudden cardiac death among patients with heart failure and left ventricular systolic dysfunction. Reasons for the low rates of utilization are not well understood. The authors examined ICD implantation rates at a university-based tertiary care center and used multivariable analysis to identify independent factors associated with ICD utilization. The ICD implantation rate for 850 eligible patients was 70%. Forty-seven (18%) patients refused implantation; women were twice as likely to refuse compared to men (8% vs 4%, P=.013). Race was not associated with utilization. On multivariable analysis, independent predictors of implantation included having a heart failure specialist (odds ratio [OR], 8.13; P<.001) or general cardiologist (OR, 2.23; P=.13) managing care, age range 70 to 79 (OR, 0.55; P<.001) or 80 and older (OR, 0.26; P<.001), female sex (OR, 0.49; P<.001), QRS interval (OR, 1.016; P<.001), diastolic blood pressure (OR, 0.979; P=.011), cerebrovascular disease (OR, 0.44; P=.007), and dementia (OR, 0.13; P=.002). Our registry of patients with cardiomyopathy and heart failure reveals that high rates of utilization are possible. Factors closely associated with ICD utilization include type of physician coordinating care, age, and comorbidities. Congest Heart Fail. 2010;16:141–146. © 2010 Wiley Periodicals, Inc.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/78684/1/j.1751-7133.2009.00139.x.pd